Convert your fence to the plus range

This page explains how to convert an existing LYSAGHT NEETASCREEN® or LYSAGHT MINISCREEN® fence to obtain a new look. By adding a steel lattice and post caps you can convert your current fence to the "plus" range.

Step 1 Remove existing screws from post and top rail junction of existing fence.
Step 2 Slide post extension down over top of existing post till cut out meets existing top rail, fasten with 2 screws.
Step 3 Engage a top rail onto the top of a lattice (see figure for correct orientation). Lower the rail and lattice onto the top of a fence panel, engaging the ends of the rail with the posts.
Fix with three hex. head screws along the bottom flange of the lattice. Protect the paintwork with a piece of cardboard between the drill and the lattice. Fix the top rail to the lattice with three hex. head screws. Fasten the top rail to the posts with one hex. head screw on both sides of each post.
Step 4 Place the ball cap over top of post extension and top rail. They can be secured with one screw on either side of the post.