Tools & Resources
Install Brick Ties and Flashings for Steel Framing
Brick ties are used to secure a non load-bearing brick veneer to a load bearing frame. Install brick ties as per AS 3700 SAA Masonry Code.
Brick-Tie Type
The type of brick-tie required and fixing procedure is pictured below.
Surface mounted brick-ties are required if solid sheet bracing is installed.
Flashing Installation
Flashing is a strip or sleeve of impervious material dressed and fitted to provide a barrier to moisture movement. Flashing materials extends from the bottom of a wall panel into the cavity and is built in to the brick work.
Flashing Fixing
On a Boxed Stud sytem, fix flashing to the frame using a 25mm galvanised clout onto the stud face.
On an Open Stud system, fix flashing with a screw onto the stud face.
If a timber block is present in a button plate, use a 25mm galvanised clout or staple to secure flashing to the timber block.
