LYSAGHT
LYSAGHT KLIP-LOK® 406
LYSAGHT KLIP-LOK® 406
Product Description and Features
LYSAGHT KLIP-LOK® 406 is a strong, durable and versatile long length roof or wall cladding. The concealed fastening method enables its use on many applications from low pitched roofs to vertical or horizontal ribbed walling.
- Fixing clips effectively secure KLIP-LOK® 406 to supports without puncturing the sheet
- No exposed fasteners means clean and smooth lines
Warnings
- LYSAGHT KLIP-LOK® 406 is only available upon enquiry in some states. Please consult the availability table below for further details
- Minimum recommended roof pitch is 2 degrees (1 in 30) for 0.42mm BMT
- Minimum recommended roof pitch is 1 degree (1 in 50) for 0.48 and 0.60mm BMT
- Read our Guidelines for using COLORBOND® steel & ZINCALUME® steel
Product Details
Specification
Lengths
Sheets are available custom cut.
Tolerance
Length: + 0mm, - 15mm
Width: + 4 mm, - 4mm
Material Specification
- ZINCALUME® steel made from zinc-aluminium alloy coated steel complying with AS1397-2001, G550 (550MPa minimum yield stress), AZ150 (150g/m2 minimum coating mass)
- COLORBOND® prepainted steel complying with AS/NZS 2728:Type 4, is made from zinc-aluminium alloy coated steel complying with AS1397-2001, G550 (550MPa minimum yield stress), AZ150 (150g/m2 minimum coating mass), or
- COLORBOND® prepainted steel complying with AS/NZS 2728:Type 6, is made from stainless steel complying with JIS G 4305, Grade 430 stainless steel, 430SS550. Subject to enquiry
- The base metal thickness is 0.42mm, 0.48mm or 0.60mm
Physical Properties
| Mass and Yield | ||||||
|---|---|---|---|---|---|---|
| Thickness (mm BMT) | COLORBOND® steel | ZINCALUME® steel | ||||
| kg/m | kg/m2 | m2/t | kg/m | kg/m2 | m2/t | |
| 0.42 | 2.04 | 5.03 | 199 | 2.01 | 4.95 | 202 |
| 0.48 | 2.32 | 5.71 | 175 | 2.28 | 5.62 | 178 |
| 0.60 | 2.86 | 7.04 | 142 | 2.82 | 6.95 | 144 |
Schematic
Availability
Availability
| NSW/ ACT | VIC | TAS | QLD | NT | SA | WA |
|---|---|---|---|---|---|---|
| Avail. | Not Avail. | Avail. | By Enquiry* | Avail. | Not Avail. | By Enquiry* |
*Please contact our sales office on 13 30 38 for availability
Colour Range
LYSAGHT KLIP-LOK® 406 is available in a limited range of COLORBOND® steel colours and in unpainted ZINCALUME® steel.
Please check with your local supplier regarding specific colour availability for this product.
Design
Span Table
The maximum recommended support spacings are based on testing in accordance with AS1562.1-1992, AS4040.1-1992 and AS4040.2-1992. Supports must not be less than 1mm BMT.
Roof spans consider both resistance to wind pressure and light roof traffic (traffic arising from incidental maintenance).
Wall spans consider resistance to wind pressure only.
The figures relate only to buildings 10m or less in height and located in sheltered or exposed suburban areas or sheltered rural areas only, for further details Download LYSAGHT KLIP-LOK® 406 (643 KB).
| Maximum Support Spacing (mm) | |||
|---|---|---|---|
| Type of Span | Thickness (mm) BMT | ||
| 0.42 | 0.48 | 0.60 | |
| Roofs Single Span End Span Internal Span Unstiffened Eaves Overhang Stiffened Eaves Overhang Walls Single Span End Span Internal Span Overhang |
1500 1700 2100 200 600 1800 1800 1800 300 |
1800 2400 3000 200 600 2400 2400 2400 400 |
2300 2700 3600 300 900 2700 3000 3000 600 |
- For roofs: the data are based on foot-traffic loading.
- For walls: the data are based on pressures. To view the limit state wind pressure capacity tables Download LYSAGHT KLIP-LOK® 406 (643 KB).
- Table data are based on supports of 1mm BMT.
- Spacing is based on one concealed clip per sheet per support. For full fixing details Download LYSAGHT KLIP-LOK® 406 (643 KB).
Capacity & Load Tables
The wind pressure capacity table can be viewed in the LYSAGHT KLIP-LOK 406® brochure. Download LYSAGHT KLIP-LOK® 406 (643 KB).
This information is suitable for use only in areas where a tropical cyclone is unlikely to occur as defined in AS1170.2-2002.
For correct specification and installation of BlueScope Lysaght roofing and walling products in cyclonic areas, please Download LYSAGHT® Cyclonic Area Design Manual Steel Roofing & Walling (334 KB).
Roof Drainage Capacity
Download Using LYSAGHT® Roofing & Walling - Chapter 2 Design Preliminaries (1262 kb) to view Table 2.4.1, Maximum Roof Lengths for Drainage.
Warranty
LYSAGHT® roofing has a material warranty of up to 25 years for corrosion to perforation and a performance warranty of up to 25 years provided it is fixed to specification.
FAQs
