LYSAGHT
LYSAGHT MULTICLAD®
Five LYSAGHT® roof and wall cladding profiles feature prominently at the redeveloped Royal Melbourne Showgrounds site.
Product Description and Features
LYSAGHT MULTICLAD® is an economical and attractive wall profile suitable for a wide range of commercial, industrial and residential applications. The long clean lines of LYSAGHT MULTICLAD® can be installed either vertically or horizontally.
- Available in a range of COLORBOND® steel colours and ZINCALUME® steel
- Attractive trapezoidal multi-ribbed profile
- 840mm wide cover makes it quick and easy to install.
Warnings
- LYSAGHT MULTICLAD® is only suitable in for use for walling in non-cyclonic areas
- Only suitable in non-cyclonic areas
- Read our Guidelines for using COLORBOND® steel & ZINCALUME® steel.
Product Details
Specifications
Lengths
Available in custom cut lengths to suit the application requirements. Check with your local supplier on the maximum and minimum available lengths.
Tolerances
Length: +0mm, -15mm
Width: +4mm, -4mm
Material Specifications
- ZINCALUME® steel made from zinc-aluminium alloy coated steel complying with AS1397-2001, G550 (550MPa minimum yield stress), AZ150 (150g/m2 minimum coating mass)
- COLORBOND® prepainted steel complying with AS/NZS 2728:Type 4, is made from zinc-aluminium alloy coated steel complying with AS1397-2001, G550 (550MPa minimum yield stress), AZ150 (150g/m2 minimum coating mass), or
- COLORBOND® prepainted steel complying with AS/NZS 2728:Type 6, is made from stainless steel complying with JIS G 4305, Grade 430 stainless steel, 430SS550. Subject to enquiry
- The base metal thickness is 0.35mm & 0.42mm
Physical Properties
| BMT | Material | kg/m | kg/m2 | m2/t |
|---|---|---|---|---|
| 0.35 | ZINCALUME® | 2.74 | 3.26 | 306 |
| 0.35 | COLORBOND® | 2.80 | 3.33 | 300 |
| 0.42 | ZINCALUME® | 3.26 | 3.88 | 258 |
| 0.42 | COLORBOND® | 3.32 | 3.95 | 254 |
Schematic
Availability
Availability
| NSW/ ACT | VIC | TAS | QLD | NT | SA | WA |
|---|---|---|---|---|---|---|
| Avail. | Avail. | Avail. | Avail. | By Enquiry* | Avail. | Not Avail. |
*Please contact our sales office on 13 30 38 for availability.
Colour Range
LYSAGHT MULTICLAD® is available in the standard range of COLORBOND® steel colours and in unpainted ZINCALUME® steel.
Please check with your local supplier regarding specific colour availability for this product.
Design
Span Tables
The maximum recommended support spacings are based on testing in accordance with AS1562.1-1992, AS4040.1-1992 and AS4040.2-1992. Supports must not be less than 1mm BMT.
Wall spans consider resistance to wind pressure only.
The figures relate only to buildings 10m or less in height and located in sheltered or exposed suburban areas or sheltered rural areas only, for further details Download LYSAGHT MULTICLAD® (473 KB).
| Maximum Support Spacing (mm) | ||
|---|---|---|
| Type of Span | Thickness (mm) BMT | |
| 0.35 | 0.42 | |
| Walls Single Span End Span Internal Span Overhang | 1400 1800 1800 150 | 1700 1800 1800 150 |
- The data are based on pressures. To view the limit state wind pressure capacity tables Download LYSAGHT MULTICLAD® (473 KB).
- Table data are based on supports of 1mm BMT.
Capacity & Load Tables
The limit state wind pressure capacity table can be viewed in the LYSAGHT MULTICLAD® brochure. Download LYSAGHT MULTICLAD® (473 KB).
This information is suitable for use only in areas where a tropical cyclone is unlikely to occur as defined in AS1170.2-2002.
FAQs
