LYSAGHT®
Home > Brands > LYSAGHT® > Roofing & Walling > Walling
LYSAGHT MULTILINE®
LYSAGHT MULTILINE® cladding is designed to resemble weatherboards
Product Description and Features
LYSAGHT MULTILINE® is a weatherboard like horizontal sheet steel cladding which is specifically designed to be fixed to stud frames. It is easily distinguishable by its horizontal microfluting along the panel face, a pan contour that casts fashionable shadow lines between each panel and chamferboard edges.
- 900mm panel width provides an economical and decorative profile to clad or re-clad houses, sheds, garages, fascias or soffits
- Can be fixed quickly and easily, designed to fix to stud frames
- Special flashings and trims available
- LYSAGHT MULTILINE® panels are available in sheet lengths from 1000mm to 6000mm and can be custom cut to any length, providing they can be safely transported
- Cost effective solution to building design ranging from Classes 1 to 10 and wind categories N1 to C3.
Common Uses of this product
External lining of walls, garages, screens, sheds, fascias, soffits
Warnings
- Not suitable for roofing
- Manufactured in Queensland, please check availability in your State with your local sales office
- To extend the life of LYSAGHT MULTILINE® give it a regular wash down to remove airbourne pollutants
- Lead and copper are not compatible with ZINCALUME® steel or COLORBOND® steel
- Ensure selection of suitable materials for environmental conditions for maximum durability
- Read full details on Guidelines for using COLORBOND® steel & ZINCALUME® steel.
Product Details
Schematic
 |
Physical Properties
| Masses | ||||
|---|---|---|---|---|
| BMT | kg/m | kg/m² | m²/t | |
| 0.42 | ZINCALUME® | 3.26 | 3.66 | 273 |
| 0.42 | COLORBOND® | 3.32 | 3.73 | 269 |
Tolerances
Length: +0 mm, -7 mm
Width: +3 mm, -3 mm
Profile Depth: 12 mm
Specification
The base material is ZINCALUME® aluminium/zinc alloy-coated steel complying with AS1397-2001 G550, AZ150 (550 MPa minimum yield stress, 150g/m2 minimum coating mass).
Cover width is 890 mm.
The base metal thickness is 0.42 mm.
The COLORBOND® steel complies with AS/NZS 2728:1997.
Colour Range
LYSAGHT® products are normally available in the standard range of COLORBOND® steel colours. View the standard colour range for:
COLORBOND® steel or
COLORBOND® Ultra and COLORBOND® Stainless steel or
Colour Chart for COLORBOND® Metallic steel
Please check with your local supplier regarding specific colour availability for individual products.
Capacity & Load Tables
LYSAGHT MULTILINE® offers the full benefits of the latest methods for modelling wind pressures. The wind pressure capacity table is determined by full scale tests conducted at BlueScope Lysaght's NATA-registered testing laboratory, using the direct pressure testing rig.
Testing was conducted in accordance with AS 1562.1-1992 Design and Installation of Sheet Roof and Wall Cladding-Metal, and AS 4040.2-1992 Resistance to Wind Pressure for Non-cyclonic Regions.
The pressure capacities for serviceability are based on a deflection limit of (span/120) + (maximum fastener pitch/30).
The pressure capacities for strength have been determined by testing the cladding to failure (ultimate capacity).
These pressures are applicable when the cladding is fixed to a minimum of 0.6 mm stud material (SUPRAFRAME®) or greater BMT.
If fixing to thinner gauge, Contact Us.
Limit State Wind Pressures (kPa) - Non-Cyclonic| Fasteners per sheet per support | Type of Span | Criteria | Span (mm) | ||||
|---|---|---|---|---|---|---|---|
| 450 | 600 | 750 | 900 | 1000 | |||
| 3 | End | Serviceability | 2.91 | 2.69 | 2.37 | 1.90 | 1.53 |
| Strength | 6.50 | 4.67 | 3.20 | 2.31 | 1.90 | ||
| Internal | Serviceability | 1.88 | 2.11 | 2.18 | 1.98 | 1.77 | |
| Strength | 7.40 | 5.37 | 3.70 | 2.63 | 2.10 | ||
| 6 | End | Serviceability | 10.62 | 7.12 | 4.23 | 2.35 | 1.42 |
| Strength | 11.10 | 8.53 | 6.50 | 5.37 | 4.90 | ||
| Internal | Serviceability | 12.20 | 8.82 | 6.00 | 4.08 | 3.08 | |
| Strength | 12.20 | 9.46 | 7.30 | 6.10 | 5.60 | ||
Frame Bending Test
An additional bending test was carried out on the LYSAGHT MULTILINE®/ LYSAGHT SUPRAFRAME® system, using 8 - 18 x 12 mm hex head self drilling self tapping screws. The frame with stud spacing 750 mm, with the screws fastened vertically at every pan and horizontally at every stud, with one screw between studs, withstood a bending load of 2.4 kPa.
 | This information is suitable for use only in non-cyclonic areas, that is where a tropical cyclone is unlikely to occur, in accordance with AS 1170.2 - 1989, SAA Loading Code, Part 2, Wind Loads.** |
** More information on the relevant Standards can be found at the Standards Australia Website
Section Properties
| Base Metal Thickness (mm) | Yield Strength (MPa) | Area (mm2) | Moment of Inertia | Torsion J (mm4) | Warping Iw x 106 (mm6) |
|
|---|---|---|---|---|---|---|
| Ixx (mm4)
x106 |
Iyy (mm4)
x106 |
|||||
| 0.42 | 550 | 393 | 0.0033 | 26.56 | 23.12 | 240.1 |
FAQs
