LYSAGHT®
Home > Brands > LYSAGHT® > Rainwater Products
LYSAGHT OGEE® Gutter
LYSAGHT OGEE® Gutter
Product Description and Features
Finish your roof with the distinctive style of the LYSAGHT OGEE® Gutter. LYSAGHT OGEE® Gutters are one of the most popular profiles, so there is a complete range of accessories to choose from.
- Available in long lengths for fast and easy installation
- Compatible with the LYSAGHT NOVALINE® Fascia System
- Manufactured from light, strong, high tensile ZINCALUME® steel or COLORBOND® steel for up to four times the life of a galvanised gutter
- Full range of accessories available including corners in matching COLORBOND® steel colours as well as stop ends, brackets and over straps
- Designed for greater durability, longer life and compatibility with steel and tile roofs
Common Uses of this product
Gutter system for steel and tile roofs. More suited in domestic applications.
Warnings
- Some profile dimensions may vary slightly from state to state. No longer available in NSW
- It is important that gutters slope towards the outlets (a minimum gutter fall of 1 in 500 is recommended). Without this slope, 'ponding' may occur, reducing the life of your gutter
- When installing gutters, remove any metal particles or debris at the end of the day to prevent staining or corrosion
- Lead and copper are not compatible with ZINCALUME® steel or COLORBOND® steel
- The protective plastic film should be stripped off immediately on installation
- Ensure selection of suitable material for environmental conditions for maximum durability
Product Details
Schematic
 |
 |
Dimensions in WA, SA and VIC
| A | = 64 mm (nominal) |
| B | = 98 mm (nominal) |
| C | = 145 mm (nominal) |
SA, WA, Vic: Effective Cross Sectional Area: 5242 mm2
Accessories
Colour Range
LYSAGHT® products are normally available in the standard range of COLORBOND® steel colours. View the standard colour range for:
COLORBOND® steel or
COLORBOND® Ultra and COLORBOND® Stainless steel or
Colour Chart for COLORBOND® Metallic steel
Please check with your local supplier regarding specific colour availability for individual products.
Roof Drainage Capacity
View information on Design of Drainage and Gutter Fall Download Using LYSAGHT® Roofing & Walling - Chapter 6 Roof Drainage (407 KB)
Fall
Install gutters with a generous fall to avoid ponding (which reduces gutter life), but the fall should not be so steep as the be obvious to the casual observer. Fall on house guttering is often about 1:250 (12mm in 3000mm), though a steeper fall of 1:100 should give the gutter a longer life.
Downpipe Design
The downpipe size and spacing should be determined in accordance with AS/NZ3500.3.2:1998 National plumbing and drainage: Part 3.2: Stormwater drainage - Acceptable solutions.
