LYSAGHT
LYSAGHT WALLCLAD®
Wollongong Westpac Life Saver Rescue Helicopter service - materials used included LYSAGHT CUSTOM ORB® and LYSAGHT WALLCLAD®
Product Description and Features
LYSAGHT WALLCLAD® is an attractive, lightweight and versatile walling profile designed for domestic, rural and commercial applications.
- Light and easy to handle and quick to install
- Flexibility of design
- Suits both traditional and modern design
- Compliments the LYSAGHT CUSTOM ORB® roofing profile
- Available in a wide variety of COLORBOND® steel colours and ZINCALUME® steel
Warnings
- LYSAGHT WALLCLAD® is only suitable in for use for walling in non-cyclonic areas
- Read our Guidelines for using COLORBOND® steel & ZINCALUME® steel.
Product Details
Specifications
Lengths
Sheets are supplied custom cut.
Tolerances
Length: + 0 mm, -10 mm
Width: + 4 mm, - 4 mm
Material Specification
- ZINCALUME® steel made from zinc-aluminium alloy coated steel complying with AS1397-2001, G550 (550MPa minimum yield stress), AZ150 (150g/m2 minimum coating mass)
- COLORBOND® prepainted steel complying with AS/NZS 2728:Type 4, is made from zinc-aluminium alloy coated steel complying with AS1397-2001, G550 (550MPa minimum yield stress), AZ150 (150g/m2 minimum coating mass) or AZ200 (200g/m2 minimum coating mass), or
- COLORBOND® prepainted steel complying with AS/NZS 2728:Type 6, is made from stainless steel complying with JIS G 4305, Grade 430 stainless steel, 430SS550. Subject to enquiry
- The base metal thickness is 0.42mm (0.35mm BMT available subject to enquiry)
Physical Properties
| Mass and Yield | ||||
|---|---|---|---|---|
| BMT (mm) | kg/m | kg/m2 | m2/t | |
| ZINCALUME® steel | 0.35 | 2.74 | 3.60 | 278 |
| COLORBOND® steel | 0.35 | 2.80 | 3.67 | 272 |
Schematic
Availability
Availability
| NSW/ ACT | VIC | TAS | QLD | NT | SA | WA |
|---|---|---|---|---|---|---|
| Not Avail. | Not Avail. | Avail. | Avail. | Avail. | Avail. | Avail. |
*Please contact our sales office on 13 30 38 for availability.
Colour Range
LYSAGHT WALLCLAD® is available in the standard range of COLORBOND® steel colours and in unpainted ZINCALUME® steel.
Please check with your local supplier regarding specific colour availability for this product.
Design
Span Table
The maximum recommended support spacings are based on testing in accordance with AS1562.1-1992, AS4040.1-1992 and AS4040.2-1992. Supports must not be less than 1mm BMT.
Wall spans consider resistance to wind pressure only.
The figures relate only to buildings 10m or less in height and located in sheltered or exposed suburban areas or sheltered rural areas only, for further details Download LYSAGHT WALLCLAD® (563 KB).
| Maximum Recommended Support Spacings (mm) | |
|---|---|
| Type of Span | Thickness (mm) BMT |
| 0.35 | |
| Walls Single Span End Span Internal Span Overhang | 2100 2400 2400 150 |
- For walls: the data are based on pressures. To view the limit state wind pressure capacity tables Download LYSAGHT WALLCLAD® (563 KB)
- Table data are based on supports of 1mm BMT.
Capacity & Load Tables
The limit state wind pressure capacity table can be viewed in the LYSAGHT WALLCLAD® brochure. Download LYSAGHT WALLCLAD® (563 KB)
This information is suitable for use only in areas where a tropical cyclone is unlikely to occur as defined in AS1170.2-2002.
FAQs
