AS/NZS 3678 - WR350 XLERPLATE®

Product Description and Features

A structural weather resistant steel with nominal yield strength of 350 MPa.

• Enhanced weather resistance
• Guaranteed minimum strength levels
• Good formability

Produced to: AS/NZS 3678

Common Uses of this product

Railway rolling stock, storage hoppers / bins, architectural features

Warnings

• This material should be used in conjunction with the appropriate structural design and welding standards.
• The weather resistance of this material is due to the formation of an impervious oxide layer through the use of alloy additions. Damage to this layer, or environmental conditions affecting the development of this layer, will impact on the effectiveness of the corrosion resistance.
• Colour retention across welds can be achieved by appropriate electrode selection. Welds may be susceptible to hot cracking.
• Weathering steels are not recommended without further protection for buried or submerged situations or for applications exposed to concentrated industrial fumes or severe marine conditions.

Product Details

Supply Conditions

• Thickness Range: 8mm-20mm
• Availability: By enquiry only
• Edge Condition: Trimmed
• Tolerances: AS1365
• Ultrasonic Inspection: AS1710 available
• Surface Inspection: BlueScope Steel (third party available)
• Certification: BlueScope Steel (third party endorsed available)
  

International standards

EN 10155-S355J0WP
ASTM A242 TYPE 1
JISG 3125-SPA-H
CORTEN A

Size Availability

For information on size availability Download XLERPLATE® and XLERCOIL® Product Information Brochure - Standard Range Products (25 kb)

Fabrication Performance

For full details on the chemical composition, mechanical properties and formability, Download WR350 XLERPLATE® Datasheet (55 KB)

FAQs