LYSAGHT
LYSAGHT RANCE® Gutters
LYSAGHT RANCE® Gutter
Product Description and Features
The LYSAGHT RANCE® Gutter range includes LYSAGHT RANCELINE® Gutter, LYSAGHT® HRC Gutter and LYSAGHT® Colonial Gutter. Each design is unique and can be used to add classic and decorative features to your home or building.
- Full range of accessories available including mitres in matching COLORBOND® steel colours as well as stop ends, brackets and straps
- Designed to be compatible with NOVALINE® Fascia system for quick, easy installation
- Designed to complement classic Australian building styles
- Manufactured from light, strong, hi-tensile ZINCALUME® steel or COLORBOND® steel for up to four times the life of a galvanised gutter in similar conditions
- Available in a range of COLORBOND® steel colours to match or contrast your roof
Warnings
- The LYSAGHT RANCE® Gutters are only available in Western Australia
- It is important gutters slope towards the outlets (a minimum gutter fall of 1 in 500 is recommended). Without this slope, 'ponding' may occur, reducing the life of your gutter
- When installing gutters, remove any metal particles or debris at the end of the day to prevent staining or corrosion
- Do not install galvanised gutters with a ZINCALUME® steel or COLORBOND® prepainted steel roof. Galvanised gutters are only suitable with galvanised steel roof
- The protective plastic film should be stripped off immediately on installation
- Read our Guidelines for using COLORBOND® steel & ZINCALUME® steel.
Product Details
Specification
Availability
Availability
| NSW/ ACT | VIC | TAS | QLD | NT | SA | WA |
|---|---|---|---|---|---|---|
| Not Avail. | Not Avail. | Not Avail. | Not Avail. | Not Avail. | Not Avail. | Avail. |
*Please contact our sales office on 13 30 38 for availability.
Colour Range
LYSAGHT RANCE® gutters and accessories are available in ZINCALUME® steel, COLORBOND® steel, and COLORBOND® steel high gloss colours. View the COLORBOND® steel colours. For high gloss colour availability please contact your local supplier.
Design
Designing Roof Drainage
Correct design of a roof drainage system is critical to the waterproofing of a building. This is a task that should only be carried out by a suitably qualified trade professional in accordance with the BCA and Australian Standards.
In the design and detailing of a roof drainage system, consideration must be given to a range of factors such as:
- rainfall intensity
- roof catchment area
- gutter size/capacity
- gutter fall
- gutter outlets (sumps, rain heads, nozzles)
- downpipe size, quantity and placement
- overflow consideration
- material selection and
- jointing
View information on the design of roof drainage systems:
- Download Using LYSAGHT® Roofing & Walling - Chapter 6 Roof Drainage (407 KB)
- Download Using LYSAGHT® Roofing & Walling - Chapter 2 Design Preliminaries (1090 KB)
- Download Gutter Overflow Leaflet (327 KB)
Downpipe Design
The downpipe size and spacing should be determined in accordance with AS/NZ3500.3.2:1998 National plumbing and drainage: Part 3.2: Stormwater drainage - Acceptable solutions.
