Search Results

Your search for Plate returned 96 results.

Forming of XLERPLATE®

This document outlines technical information on forming and bending of XLERPLATE®. It details factors to be considered when cold forming XLERPLATE®, including steel type, direction of forming relative to the principal rolling direction of the plate, edge and surface condition, and other practical factors. It also contains information on the properties of cold formed components, and the hot forming process.

Date Released: 05 January 2003 Barcode: 9320075016081 File Details: PDF 117 KB

HA250 TRU-SPEC® coil plate steel Datasheet

This two page datasheet outlines information on HA250 TRU-SPEC® coil plate steel, a hot rolled structural product with minimum yield strength of 250 MPa, good ductility and good weldability. Information contained in the datasheet is: product descriptions, supply conditions, typical uses, features and benefits, warnings, chemical composition, mechanical properties, dimensions and fabricating performance.

Date Released: 01 February 2014 File Details: PDF 240 KB

HA300 TRU-SPEC® coil plate steel Datasheet

This two page datasheet outlines information on HA300 TRU-SPEC® coil plate steel, a hot rolled structural product with minimum yield strength of 300 MPa, good ductility and good weldability. Information contained in the datasheet is: product descriptions, supply conditions, typical uses, features and benefits, warnings, chemical composition, mechanical properties, dimensions and fabricating performance.

Date Released: 01 September 2014 File Details: PDF 239 KB

HW350 TRU-SPEC® coil plate steel Datasheet

This two page datasheet outlines information on HW350 TRU-SPEC® coil plate steel, a hot rolled structural, weather resistant steel with a nominal minimum yield strength of 350 MPa, good formability and good weldability. Information contained in the datasheet is: product descriptions, supply conditions, typical uses, features and benefits, warnings, chemical composition, mechanical properties, dimensions and fabricating performance.

Date Released: 01 September 2014 File Details: PDF 235 KB

K1042 XLERPLATE® steel Datasheet

This two page datasheet outlines information on K1042 XLERPLATE® steel, a heat treatable plate grade for general engineering applications. Information contained in the datasheet is: product descriptions, supply conditions, typical uses, features and benefits, warnings, nearest overseas specifications, chemical composition, mechanical properties, formability, hardness and weldability.

Date Released: 01 January 2015 Barcode: 9320075081096 File Details: PDF 176 KB

Welding of Hot Rolled Steel

This four page document provides information on welding of XLER® products. It contains information on the procedure for determining preheat and welding energy input, a weldability guide and schematics to assist with the establishment of Joint Weldability Index, and determination of preheat temperature.

Date Released: 07 January 2000 Barcode: 9320075016098 File Details: PDF 202 KB

Safety Data Sheet Hot Rolled Steel Plate, Strip and Sheet

Safety Datasheet provides information on Hot Rolled Steel Plate, Strip and Sheet. Infosafe No. HXH6W

Date Released: 27 February 2018 Barcode: 9320075087036 File Details: PDF 198 KB

Wenco Prepares Steel for its Toughest Test

This application report outlines the construction of outer dome plates for the No.5 Blast Furnace at Port Kembla Steelworks. The project uses XLERPLATE® steel.

Date Released: 21 July 2006 Barcode: 9320075046378 File Details: PDF 301 KB

Silo Project Continues Trend to Steel

This application report outlines a A$100 million upgrade to grain handling facilities in the Western Australian port of Albany. The project uses more than 3,000 tonnes of XLERPLATE® steel.

Date Released: 21 July 2006 Barcode: 9320075046750 File Details: PDF 370 KB

XLERPLATE® steel stores Melbourne Water

This application report outlines construction of a 33 megalitre storage tank at Mornington and a 53 megalitre storage tank at Frankston. Both tanks have been fabricated from XLERPLATE® steel.

Date Released: 21 July 2006 Barcode: 9320075046453 File Details: PDF 256 KB

Air Ride Wind Fires up for BlueScope Steel New Furnace

This application report outlines the fabrication of ductwork and stack as part ofthe Hot Strip Mill Project at BlueScope Steel's Port Kembla Steelworks. Approximately 30 tonnes of 250 grade XLERPLATE® steel was used.

Date Released: 21 July 2006 Barcode: 9320075046392 File Details: PDF 260 KB

AS/NZS 1594-HA250 TRU-SPEC® Floorplate

This three page datasheet outlines information on AS/NZS 1594-HA250 TRU-SPEC® Floorplate steel floor plate, a hot rolled structural floor plate (raised pattern on one surface); Product with a minimum yield strength of 250 MPa and good weldability. Information contained in the datasheet is: general descriptions, supply conditions, features and benefits, warnings, chemical composition, mechanical properties, dimensions and fabricating performance.

Date Released: 01 June 2016 File Details: PDF 190 KB

Steel Shuttles Bound for Dampier Port

This report outlines the fabrication of nine shuttle conveyors for the Hamersley Iron Dampier port upgrade. The A$685 million project used about 12 to 18 tonnes of 300 grade XLERPLATE® steel in each shuttle.

Date Released: 24 February 2006 Barcode: 9320075044862 File Details: PDF 306 KB

EMBAR® steel AS/NZS 3679.1-300 Datasheet

A medium strength structural steel product with nominal yield strength of 300 MPa

Date Released: 02 February 2018 Barcode: 9320075086572 File Details: PDF 156 KB

Steel Solution for Ion Industry

This application report provides information on Ion implanter magnets manufactured by Buckley Systems in New Zealand.

Date Released: 01 January 2006 Barcode: 9320075045760 File Details: PDF 277 KB

Agpoint Breaks Ground with XLERPLATE®

This report contains information on Agpoint, South Australia, who uses XLERPLATE® in the manufacture of agricultural wear parts.

Date Released: 01 January 2006 Barcode: 9320075045791 File Details: PDF 345 KB

Guidance on the Welding of Weathering Steels

This documents outlines the welding of weathering steels. It covers: Precautions and Welding Consumable Selection.

Date Released: 03 March 2006 Barcode: 9320075046330 File Details: PDF 44 KB

Counterweight XLERPLATE® steel Datasheet

Date Released: 01 January 2015 Barcode: 9320075081133 File Details: PDF 129 KB

REDCOR® weathering steel AS/NZS3678-WR350 (A) (L0, L20)

WR350(A) is a high phosphorous structural weathering steel with nominal yield strength of 340MPa for thicknesses from 8 to 12mm with guaranteed impact performance at 0 and -20 0C.

Date Released: 12 December 2017 Barcode: 9320075086541 File Details: PDF 170 KB

BlueScope Steel Product Dimensional Tolerance Handbook

This 16 page handbook provides dimensional tolerances for coated and uncoated flat products; plate and floorplate rolled on a plate mill (AS/NZS 1365:1996 & AS 1548:1995); hot rolled plate, floorplate, sheet and strip rolled on a hot strip mill; cold rolled and cold rolled metallic coated sheet & strip

Date Released: 18 June 2003 Barcode: 9320075035112 File Details: PDF 1274 KB