FAQs

You can find your closest suppliers using our Find a Supplier.

Prices will vary depending on the manufacturer you choose.  Bluescope Steel makes COLORBOND® steel as flat sheet rolled into coils.  It's our rollformer customers who turn this 'raw' material into the various profiles and products you're familiar with. Please use our Find a Supplier to find a rollformer in your area who will be able to help you with information on pricing of their products.

You can order colour samples on our Brochure and Swatches page, or Find a Supplier.

Some manufacturers do sell roof sheeting made from COLORBOND® steel with a top coat on both sides. However, colours and styles may be limited and you should confirm availability with your supplier.

While Bluescope Steel makes COLORBOND® steel, it's our rollforming customers who turn it into the various steel products you're familiar with, such as roof cladding, guttering and fencing panels. There are many rollformers out there, each supplying different products with different product specifications. You can Find a Supplier in your area who will be able to help you with the types of profiles they have available and other product information.

Neutral Cure silicone rubber sealants are the only sealants recommended for use with COLORBOND® steel and ZINCALUME® steel. Look for the words "Neutral Cure" on the sealant cartridge to make sure.  View our page:  Select a sealant for the job.

Lead is not compatible with ZINCALUME® steel or COLORBOND® steel. ZINCALUME® steel or COLORBOND® steel is also prone to corrosion when in contact with or receiving run off water from lead.

Instead of lead, the recommended flashing materials that can be formed on site are soft zinc or aluminium.

Popular flashing materials include COLORBOND® steel or ZINCALUME® steel sheet formed to suit the application. While zinc-coated steel can be used with ZINCALUME® steel or COLORBOND® steel, its generally lesser life span makes it impractical in the long term.

When using COLORBOND® Stainless steel we recommend the use of stainless steel flashing products. Flashings made from zinc coated, zinc/aluminium alloy coated and COLORBOND® prepainted steel should not be used with COLORBOND® Stainless steel.

Roof penetration flashings are also available in a wide range of rubber and aluminium materials, and these are commonly used.

In the event of roof renewals where lead flashing already exists and its re-use is desirable, the ZINCALUME® steel or COLORBOND® steel should be insulated from the lead by a suitable barrier. This can be achieved by painting the underside of the lead. Plastic film can also be used to separate the surfaces, provided it is robust enough and will not tear, eg Polyethylene damp-course.

Painting the underside of lead flashings already existing on an old building well enough to ensure separation is not easy. Polyethylene damp-course placed between the lead and ZINCALUME® steel or COLORBOND® steel sheet is a better alternative.

Lead in the water run-off can be avoided by painting the top surface of the lead flashing. Applying two or three coats of water-based acrylic is suitable but any painting should be maintained so that it will not break down and expose any of the lead surface.

This information is intended as a guide only. For further information, please Download Technical Bulletin TB 8 - Selection and use of steel eave gutter, downpipe and fascia products

Condensation forms under/on roof sheeting when the sheeting becomes colder than the air in contact with it. Water vapour carried in the air then condenses on the colder surface of the roof sheet. To minimise the risk of water damage to ceilings or corrosion related to condensation under steel roof sheeting, a vapour barrier should be provided under the sheeting to prevent contact between the moist air in the building and the roof sheeting.

Reflective foil laminates (sarking) which are commonly used to provide heat insulation under roof sheeting can serve a dual function as a vapour barrier, by thoroughly sealing the foil overlaps with moisture impervious adhesive tape.

The laps should be about 100 mm and kept in close contact when positioning the laminate so the tape can be readily applied.

The laminate must be allowed to drape between the roof supports so that the cold temperature of the roof sheeting will not be transmitted to the laminate by contact. If this were to happen condensation could form on the underside of the laminate and may drip into the ceiling space.

Ventilation of the ceiling cavity may assist in the reduction of condensation however it has been shown that ventilation will not completely eliminate the condensation cycle. In certain marine situations ventilation may also carry salts into the roof cavity which will, in the presence of condensation, lead to accelerated corrosion attack.

For more information, please Download Corrosion Technical Bulletin CTB 11 - Condensation and Insulation.

View our page How To Insulate Steel Roofs.

Please view our page Choose fasteners for cladding.